Australia Awards in Indonesia

Australia Awards adalah beasiswa dan studi singkat bergengsi yang bersifat transformatif, diberikan kepada para pemimpin masa depan untuk menempuh studi, penelitian, dan pengembangan profesional di Australia

AUSTEMPERED DUCTILE IRON PRODUCTION TECHNOLOGY FROM BASE MATERIAL PRODUCED BY FERRO-CASTING INDUSTRY IN INDONESIA

06 Agustus 2019

Austempered Ductile Iron Production Technology From Base Material Produced By Ferro-Casting Industry In Indonesia

Rianti Dewi Wulansari Sulamet Ariobimo, 2003
University of Queensland

Abstract

The quality of Austempered Ductile Iron, ADI, made from lndonesianproduced Ferro-Casting Ductile Iron, FCDI, as base material is discussed. FCDI that is made for routine consumption in Indonesia; not especially as ADl base material, is assessed for chemical composition and mechanical properties. It is then austempered at austenisation temperature 950°C with 1 hour holding. Three austempering temperatures, 300°C, 350°C, and 400°C, were investigated with 1 hour holding time using fluidized bed furnace. Metallographic examinations, tension tests and Brinen hardness number tests, were then carried out for the resulting ADI. Based on ASTM A897M - 90, the products of austempering temperature 300°C and 350°C can be classified as ADl 850/550/10. This shows that the Indonesian-produced FCDI base material can be used for ADI production.

Bagikan artikel ini di:

Artikel Terkait


Kembali ke atas